1 winpin up casino gamepinupaviator bonus game1 win casino
  • LEADING PROVIDER

    OF INDUSTRIAL SOLUTIONS

  • PRODUCT BEST RATE
  • NO. 1 EASTERN INDIA
  • LEADING PROVIDER

    OF INDUSTRIAL SOLUTIONS

  • PRODUCT BEST RATE
  • NO. 1 EASTERN INDIA

SPECIFICATIONS – REGULAR

    Product Features:

    • Din sized enclosure for panel mounting.
    • Wide Voltage range
    • Front / Rear reset facility provided.
    • Hold / Restart options (selectable) during power failure.
    • Input signal from proximity switch ( NPN / PNP type) or Potential free (zero volt) signal from limit switch, relay o/p etc
    • Over-voltage protection
    • CT-5: Digital, single window 5 digit 7 segment red LED display with up counting for process value.
    • Preset Counts can be programmed with the help of thumbwheel switch
    • H3CT-5U : Digital, single window 5 digit 7 segment red LED display with up counting for both process value and set value
    • Input sensitivity – programmable (1-100Hz)
    ModelCT-5H3CT-5U
    FunctionUp Counter with Hold mode
    Rated supply voltage85V-270V AC, 85V-270V DC
    Rated frequency50 / 60Hz  ±5%
    Power consumptionApprox. 4VA / 1W,
    Control relay output1 c/o rated for 5A@250V AC / 28V DC resistive load
    Count range0-99999counts.
    Count speed100Hz. max (min I/P pulse width 200msec)100Hz max (min I/P pulse width 5msec)
    Display5 digit 7 segment LED 10mm5 digit 7 segment LED 0.28”
    Recovery time2sec minimum
    Resetting time250msec minimum
    Ambient temperatureOperation: -100C to +550C, Storage: -250C to 800C
    HumidityMax. 85% RH @ 400C
    Service life (under no load)106 operations minimum
    Electrical life (under full load)105 operations minimum
    Insulation resistance>100M ohms @ 500V DC
    Di-electrical strength1.  2.5KV AC, 50Hz for 1minute. (Between current carrying and non-current carrying parts).

    2.  1.5KV AC, 50Hz for 1minute. (Between contacts and control circuit).

    3.  750VAC, 50Hz for 1minute. (Between non-continuous contacts of the relay).

    Electrical connectionScrew type terminals with self lifting clamps
    Dimension (over-all)72  x 72 x 128.5mm (W x H x D)48 x 48 x 115mm (W x H x D)
    Sensor typeProximity NPN / PNP Without Short Circuit ProtectionLimit Switch, Proximity NPN / PNP Without Short Circuit Protection

    Connections:

    Dimensions:

    Accessories:

    • Front  Protective Cover:  The front  protective cover shields the front panel from dust and dirt and water drip. It also prevents the set value from being altered due to accidental contact with tact switches.
    • Back Protective Cover: Back protective cover  protects the user from live wires.

    Hints on correct use:

    • Do not apply power to the Sensor, Hold / restart, program enable, external reset & link NPN / PNP terminals.

    Caution:

    • Do not change the counter value while the counter is in operation.
    • Application of voltage other than the specified one will permanently damage the counter.
    • Use 2.5mm2 U-type lugs with sleeve for connections and wiring .
    • NOTE : User should not apply external voltage to the terminals that are designated as potential free(Zero/No Volt).