Cast Resin Low Voltage – Betobar

Self-extinguishing insulation as per IEC 6033

Features

• Compact Smaller Dimension
• Simple and easy for Installation
• Low Voltage Drop and High Short Circuit withstand Capacity
• Overload Capacity of +20% for 2 Hours. Degree of Protection of IP68 for L.V bus ways and IP67 for M.V bus ways as per IEC 60529
• High Mechanical Impact strength of IK.10 as per DIN 52453 & IEC 62262
• Fire Wall Bushings of S90 & S120 in accordance with EN1366-3 and NBN 713.020
• Fire Retardant Bushings A90 for Normal fire and H60 for Hydrocarbon Fire In Offshore Applications
• Self-extingusihing insulation as per IEC 60332.

Presentation

Betobar busbars have been developed as a modern, all-purpose means of efficient and safe transmission of electrical energy. They have been in manufacture for more than thirty-five years. This system complies with all the requirements for current distribution at low and medium voltage.The busbar consists of copper or aluminium conductors, embedded in an enclosure of a fire retardant, self extinguishing and homogeneous insulation mix based on epoxy cast-resin with mineral fillers ensuring high mechanical strength and chemical withstand.Standard types are available for current ratings up to 5000 A and Voltage ratings up to 17.5kV. Systems for higher current ratings or DC applications are possible on request.

The busbar line consists of a number of prefabricated elements. The electrical joining of the conductors is achieved by means of double fish plates and high tensile steel bolts.The junctions and the element ends are overcast with the same insulation mix as used for the elements. In this way an integral insulating enclosure to IP68.IK10 is guaranteed over the full length of the busbar run. Straight junctions and also elbow junctions are available each facilitating installation adjustments of 10-20 mm per standard junction.

Benefits

• Energy Saver
• Flexible Distribution
• Less Space
• Conserves Raw Materials & Produces less waste
• Reusable